The V-Guard VG 500 Voltage Stabilizer is designed to protect air conditioners up to 2 Ton or 24,000 BTU/hr from potentially harmful voltage fluctuations. With a 15A capacity and 170V–270V input working range, it is intended for households that need dependable voltage management for larger air conditioners. Intelligent Time Delay, low- and high-voltage cut-off, IC-based control and thermal overload protection work together to help safeguard sensitive AC components during unstable power conditions. Customers comparing other models can also browse Nikshan Electronics’ electrical stabilizer collection for AC, refrigerator and television stabilizers.
V-Guard VG 500 Voltage Stabilizer
The VG 500 is specifically designed for one air conditioner up to 2 Ton or 24,000 BTU/hr.
This makes it appropriate for larger split or window air-conditioning systems where the connected appliance remains within the stabilizer’s rated current and capacity limits.
V-Guard lists the VG 500 at 15 Ampere, while its buying guide places the model at approximately 3350 VA.
Customers using smaller 1.5 Ton air conditioners can also compare models such as the V-Guard VG 4170 stabilizer listed by Nikshan Electronics.
170V–270V Input Working Range
The official working range for the VG 500 is 170V AC to 270V AC.
When incoming voltage remains within the stabilizer’s designed operating window, the unit regulates the supply delivered to the connected air conditioner.
If incoming voltage moves beyond safe limits, the protection system can disconnect the output rather than continuing to feed potentially harmful voltage to the appliance.
This makes a dedicated AC stabilizer particularly useful in locations where supply voltage regularly rises or falls outside normal conditions.
Intelligent Time Delay System
The VG 500 incorporates V-Guard’s Intelligent Time Delay System, or ITDS.
Current exact-model information specifies a delay of approximately 3 minutes ±20 seconds.
The purpose of this delay is to give the air-conditioner compressor sufficient balancing time after a power interruption before power is restored.
This is especially relevant during repeated power cuts or rapid restoration cycles, where immediately restarting a compressor may place additional mechanical and electrical stress on the system.
Low and High Voltage Cut-Off Protection
V-Guard officially lists low- and high-voltage cut-off protection as a core feature of the VG 500.
The stabilizer monitors the incoming supply and disconnects the connected appliance when voltage falls outside the permitted operating range.
This helps protect sensitive AC electronics from abnormal supply conditions.
Modern air conditioners often contain control PCBs, sensors and compressor electronics, so maintaining supply within the appliance’s intended operating conditions can help reduce avoidable electrical stress.
Built-In Thermal Overload Protection
Current exact-model documentation also confirms built-in thermal overload protection.
If excessive temperature develops inside the stabilizer because of overload or a fault in the connected equipment, the protective circuit can cut the output.
This helps protect both the stabilizer and connected AC from continued operation under abnormal thermal conditions.
Thermal overload protection should not be treated as a substitute for correct product sizing. The VG 500 should only be used with an air conditioner that remains within its rated capacity.
Latest IC Technology
V-Guard describes the VG 500 as using its latest IC technology for reliable protection.
The electronic control circuit monitors voltage conditions and controls the switching required for stabilizer operation.
Compared with a simple passive protection device, the stabilizer actively responds to changing voltage conditions within its specified design limits.
For customers comparing different capacities, Nikshan’s electrical stabilizer range includes multiple V-Guard models for different appliances.
Wall-Mounted ABS Cabinet
The VG 500 uses a wall-mount cabinet design, allowing the stabilizer to be installed near the air conditioner without occupying floor or tabletop space.
Current exact-model listings identify the enclosure as ABS plastic.
Wall mounting is particularly useful for AC stabilizers because it allows the unit to be kept away from floor moisture, accidental impact and general household movement.
Installation should provide adequate ventilation around the stabilizer and should not block its heat-dissipation areas.
Suitable for Unstable Power Conditions
The VG 500 is especially useful in areas where household voltage regularly moves outside a narrow nominal range.
Its combination of voltage regulation, cut-off protection, compressor restart delay and thermal protection provides multiple layers of electrical protection for compatible air conditioners.
However, no stabilizer can protect against every possible electrical event. Proper earthing, correctly rated wiring and suitable upstream circuit protection remain important parts of a safe AC installation.
Key Features
- Designed for one AC up to 2 Ton
- Supports up to 24,000 BTU/hr
- 15A rated capacity
- 170V–270V input working range
- Approximately 3350 VA model capacity
- Intelligent Time Delay System
- 3 minutes ±20 seconds ITDS
- Low-voltage cut-off
- High-voltage cut-off
- Latest IC technology
- Built-in thermal overload protection
- Wall-mount installation
- ABS cabinet
- Single-phase design
- Suitable for larger household air conditioners
- 3-year warranty
V-Guard Stabilizer in Kerala
The V-Guard VG 500 Voltage Stabilizer is a practical choice in Kerala for households using air conditioners up to 2 Ton and dealing with variable mains voltage.
Its 170V–270V working range, compressor time-delay system and voltage cut-off protection make it particularly relevant for areas where power quality can fluctuate.
Customers can compare the VG 500 with Nikshan Electronics’ wider electrical stabilizer collection before choosing a stabilizer matched to their AC capacity.
AC Stabilizer in Kannur and Calicut
For customers searching for an AC stabilizer in Kannur or a 2 Ton stabilizer in Calicut, the VG 500 provides a purpose-built 15A platform for compatible air conditioners.
Nikshan Electronics also lists other V-Guard options such as the VG 4170 AC Stabilizer for smaller-capacity AC applications.
Always select the stabilizer according to the air conditioner’s actual rated load rather than only the room size.
Check current showroom pricing, online availability and applicable promotional offers before ordering, as stock and prices may change.
Buy V-Guard VG 500 Voltage Stabilizer Online in Kerala
Choose the V-Guard VG 500 Voltage Stabilizer for a 2 Ton / 24,000 BTU/hr AC application, 15A capacity, 170V–270V operating range, Intelligent Time Delay and built-in voltage and thermal protection.
Buy the V-Guard VG 500 online in Kerala from Nikshan Electronics for genuine products, competitive offers and dependable service across Kannur, Calicut and Kerala.
Customers can browse Nikshan’s complete electrical stabilizer collection, compare the V-Guard VG 4170, or explore additional stabilizers for other home appliances before ordering.
The VG 500 carries a 3-year warranty under V-Guard’s current AC stabilizer documentation.
| Specification | Details |
|---|---|
| Brand | V-Guard |
| Product Type | Voltage Stabilizer |
| Input Working Range | 170V AC – 270V AC |
| Maximum Cooling Capacity | Up to 24,000 BTU/Hour |
| Output Voltage Range | 180V – 260V |
| Time Delay | 3 Minutes / 20 Seconds ITDS |
| Technology | Latest IC Technology |
| Protection Features | Low and High Voltage Cut-off Protection |
| Mounting Type | Wall Mount |
| Cabinet Material | ABS |
| Warranty | 3 Years Company Warranty |
