V-Guard Pebble Max 10L Water Heater 2000W Vertical Storage Geyser with Incoloy 800 Heating Element & 7 Year Inner Tank Warranty

The V-Guard Pebble Max 10L Water Heater is a compact storage geyser designed for households that need reliable hot water with strong corrosion protection and efficient electrical performance. V-Guard equips the current Pebble Max 10 with a 2000W Incoloy 800 heating coil, 5-Star BEE rating, glass-lined anti-corrosion steel tank, PUF insulation and sacrificial anode. Its 10-litre capacity is practical for smaller bathrooms and moderate hot-water requirements, while 8 kg/cm² pressure compatibility makes the unit suitable for many high-rise installations. Customers comparing other capacities can browse Nikshan Electronics’ storage water heater collection or its wider hot water heater range.

V-Guard Pebble Max 10L Water Heater

The 10-litre storage capacity provides a practical balance between compact installation and stored hot-water availability.

It can suit bathrooms, smaller households and other applications where a very large 15L or 25L tank may not be necessary.

Unlike an instant heater, a storage geyser heats and retains a fixed volume of water inside an insulated tank. This makes proper sizing important because actual usable hot-water quantity depends on inlet-water temperature, thermostat setting and how hot and cold water are mixed at the outlet.

V-Guard specifies vertical mounting for the Pebble Max 10.

Customers considering other V-Guard options can also compare Nikshan’s V-Guard Pebble 15L water heater and other storage models.

2000W Incoloy 800 Heating Element

The Pebble Max uses a high-efficiency Incoloy 800 heating coil rated at 2000 watts.

V-Guard highlights Incoloy for its corrosion resistance and long service life, an important consideration when a heating element operates continuously in contact with heated water.

The 2000W rating provides useful heating performance without moving into the higher electrical load of some 3kW heaters.

Actual heating time varies with inlet-water temperature, thermostat setting and the amount of water being reheated.

A suitable earthed electrical circuit and appropriate protective device should be used according to installation instructions.

5-Star Energy Efficiency

An important correction to the supplied specification is the energy rating.

The current V-Guard Pebble Max brochure lists the Pebble Max 10 as a 5-Star model, not 3 Star.

The heater also uses PUF insulation, which helps limit heat loss from stored water and reduces the need for repeated reheating.

A higher BEE rating indicates stronger rated energy-efficiency performance under the applicable test standard, although household power consumption still depends on hot-water usage, thermostat setting and ambient conditions.

Glass-Lined Anti-Corrosion Inner Tank

V-Guard uses a high-quality steel inner tank with glass-lined anti-corrosion coating in the Pebble Max series.

The protective lining creates a barrier between the steel tank and stored water, helping improve resistance to corrosion.

This is supplemented by a sacrificial anode, which provides additional corrosion protection for the tank system.

These features make the Pebble Max particularly relevant for customers concerned about long-term storage-tank durability.

Periodic servicing remains important because sacrificial anodes are wear components and may eventually require inspection or replacement.

Suitable for Hard-Water Conditions

V-Guard specifically highlights the corrosion-resistant heating system and tank protection as suitable for demanding water conditions.

The Incoloy 800 element, anti-corrosion tank coating and sacrificial anode work together to improve durability where mineral content can accelerate scale or corrosion.

“Suitable for hard water” should not be interpreted as meaning that scale can never form. Hardness minerals can still accumulate over time, so periodic descaling and servicing may be required depending on local water quality.

8 Bar High-Rise Compatibility

The Pebble Max 10 is rated to withstand 0.8 MPa, equivalent to 8 kg/cm² working pressure.

V-Guard positions this pressure resistance for multi-storey buildings and pressure-pump installations.

This makes the unit suitable for many apartments where inlet pressure can be significantly higher than in conventional low-rise plumbing.

Installation should still be performed by a qualified technician who can verify actual line pressure, plumbing condition and valve installation.

Multifunctional Safety Valve

The Pebble Max incorporates a multifunctional safety valve as part of its pressure-management system.

A storage water heater naturally experiences pressure changes as water heats and expands, so correct valve installation is essential.

The safety valve should never be blocked, modified or removed.

Any unusual leakage, overheating, repeated electrical tripping or abnormal pressure behaviour should be inspected by an authorised service technician rather than bypassing the protective system.

Adjustable Temperature Control

V-Guard provides an adjustment knob for convenient temperature setting.

This allows users to select a suitable water-temperature level according to seasonal and personal requirements instead of operating at maximum temperature continuously.

Using an appropriate setting can improve comfort and may reduce unnecessary energy use.

Hot-water temperature should always be checked before bathing, particularly where children or elderly family members use the outlet.

Rust-Proof ABS Outer Cover

The outer enclosure is made from rust-proof ABS material, protecting the exterior from the humid conditions typical of bathrooms.

ABS also keeps the external enclosure relatively lightweight and provides electrical insulation characteristics suited to appliance housings.

The unit should nevertheless be installed away from direct shower spray and in accordance with V-Guard’s electrical clearance instructions.

Compact Vertical Design

Official dimensions for the current Pebble Max 10 are approximately 36.03 cm body diameter and 36.29 cm height.

These measurements correct the supplied 33.2 × 35.3 cm specification, which corresponds to the older Pebble 10 family rather than the Pebble Max 10.

The compact cylindrical vertical format makes the heater practical where wall space is limited.

Key Features

• 10-litre storage capacity
• 2000W power rating
• 5-Star BEE rating
• Incoloy 800 heating coil
• High-quality steel inner tank
• Glass-lined anti-corrosion coating
• Sacrificial anode
• Rust-proof ABS outer cover
• PUF insulation
• Adjustable temperature knob
• Multifunctional safety valve
• 8 kg/cm² maximum pressure
• Suitable for multi-storey buildings
• Hard-water-oriented corrosion protection
• Vertical wall mounting
• 36.03 cm diameter
• 36.29 cm height
• 3-year product warranty
• 4-year heating-element warranty
• 8-year inner-tank warranty

V-Guard Water Heater in Kerala

The V-Guard Pebble Max 10L Water Heater is a practical premium option in Kerala for households that want compact storage capacity together with hard-water-oriented corrosion protection and high-rise pressure compatibility.

Its 5-Star energy rating, 2000W Incoloy heating system and insulated storage tank provide a strong combination for routine bathroom use.

Customers can browse Nikshan Electronics’ storage water heaters to compare V-Guard and other brands by capacity, wattage, pressure rating and warranty.

Water Heater in Kannur and Calicut

For customers searching for a 10 litre water heater in Kannur or a storage geyser in Calicut, the Pebble Max 10 offers a compact format with 8-bar pressure handling and long tank-warranty coverage.

Nikshan Electronics also lists related products through its hot water heater range, including V-Guard storage models in multiple capacities.

Check current showroom pricing, online availability, installation charges and promotional offers before ordering, as stock and prices may change.

Buy V-Guard Pebble Max 10L Water Heater Online in Kerala

Choose the V-Guard Pebble Max 10L Water Heater for 5-Star energy efficiency, 2000W Incoloy 800 heating, glass-lined tank protection, PUF insulation and 8-bar pressure compatibility. Its compact 10-litre capacity makes it particularly useful where moderate hot-water storage and limited wall space are priorities.

Buy the V-Guard Pebble Max 10L Water Heater online in Kerala from Nikshan Electronics for genuine products, competitive offers and dependable service across Kannur, Calicut and Kerala.

Customers can compare Nikshan’s storage water heater collection, browse water heaters under ₹10,000, or view the related V-Guard Pebble 15L Water Heater before ordering.

V-Guard’s current official Pebble Max brochure confirms 3 years on the product, 4 years on the heating element and 8 years on the inner tank.