The Philips TAT1269 True Wireless Earbuds are compact everyday earbuds designed for users who want strong battery life, straightforward Bluetooth connectivity and a lightweight in-ear form factor. Philips equips the TAT1269BK/94 with 13mm drivers, Bluetooth 5.4, touch controls and up to 40 hours of total music playback, while IPX5 water resistance makes the earbuds more suitable for workouts, commuting and everyday outdoor use. Fast charging can provide up to 100 minutes of playback from a 10-minute top-up. Customers comparing other personal-audio options can browse Nikshan Electronics’ earbuds collection or wider audio range.
Philips TAT1269 True Wireless Earbuds
The TAT1269 uses 13mm drivers designed to provide a full-range listening experience for music, movies, podcasts and calls.
Philips specifies a frequency response of 20Hz–20kHz, impedance of 32Ω, sensitivity of 107 ±3dB at 1kHz and maximum input power of 5mW.
These figures place the product clearly in the everyday consumer TWS category rather than positioning it as a studio-monitoring earphone.
The official driver type is listed as Composite, so this is the most accurate specification to publish instead of describing the internal driver construction more narrowly without supporting documentation.
Customers comparing other Philips personal-audio products can explore the verified Philips brand collection at Nikshan Electronics.
Up to 40 Hours Total Playtime
One of the strongest features of the TAT1269 is its up to 40 hours total music playtime when the earbuds and charging case are used together.
Philips promotes this extended runtime as suitable for daily workouts, commutes and longer listening sessions where frequent charging is inconvenient.
Actual battery life can vary depending on listening volume, call usage, Bluetooth conditions and other operating factors.
The official charging time is approximately two hours.
For accurate product communication, the headline should remain “up to 40 hours total playtime” rather than implying 40 hours from a single earbud charge.
10-Minute Fast Charging
The TAT1269 supports practical fast charging.
Philips states that 10 minutes of charging can provide up to 100 minutes of playback.
This can be particularly useful before a commute, workout or short journey when the battery is low and there is not enough time for a complete charging cycle.
A USB-C cable is included with the earbuds.
Fast-charge performance can vary with charger specification, battery condition and environmental conditions, so the “up to” wording should be retained.
Bluetooth 5.4 Connectivity
Philips specifies Bluetooth 5.4 for the TAT1269BK/94.
The earbuds support A2DP, AVRCP, HFP and HSP profiles, with both SBC and AAC codecs available. Maximum wireless range is listed at up to approximately 10 metres under suitable conditions.
Bluetooth 5.4 provides the wireless connection for compatible smartphones, laptops and tablets.
Actual range may be reduced by walls, other wireless devices and the position of the connected phone or computer.
SBC and AAC Codec Support
Support for both SBC and AAC provides compatibility with a broad range of modern Bluetooth devices.
AAC support can be useful with compatible smartphones and tablets that use the codec for Bluetooth audio transmission.
Final sound quality still depends on the recording, connected device, streaming service and Bluetooth implementation.
The earbuds should therefore be described as supporting AAC rather than promising a specific “Hi-Res” or lossless audio capability, which Philips does not claim for this model.
IPX5 Water and Sweat Resistance
The Philips TAT1269 has an official IPX5 water-resistance rating.
Philips positions this protection for exposure to sweat, splashes and light rain, making the earbuds suitable for workouts, running and everyday commuting.
IPX5 does not mean the earbuds are designed for swimming or complete immersion in water.
The charging case should also be kept dry unless a separate case rating is specifically provided.
Touch Controls
Philips confirms touch controls on the TAT1269.
Users can tap the earbuds to manage supported playback and call functions without needing to reach for the connected phone. Philips specifically describes controls for play/pause, track navigation, volume and answering calls.
This touch-based interface keeps the earbud exterior compact and avoids large physical buttons.
Users may need a short adjustment period to learn the exact tap combinations described in the supplied quick-start guide.
Built-In Microphones for Calls
Philips lists a built-in microphone system with two microphones for calls.
This supports everyday voice calling when the earbuds are connected to a compatible smartphone, tablet or laptop.
The official specification does not advertise a dedicated ANC or advanced ENC platform for this model.
For that reason, the product page should focus on standard built-in calling rather than adding unsupported “AI noise cancellation” or “quad mic ENC” claims from other Philips models.
Voice Assistant Support
The earbuds are officially voice-assistant compatible, with manual activation supported.
This allows users to trigger the assistant supported by their connected device where compatibility is available.
Voice-assistant functionality ultimately depends on the smartphone or tablet operating system and its configured assistant service.
Comfortable In-Ear Fit
Philips includes three ear-tip sizes: small, medium and large.
Choosing the appropriate ear-tip size can improve comfort, stability and passive acoustic sealing.
A better seal can also improve perceived bass response and reduce some external sound naturally, even though the TAT1269 does not include active noise cancellation.
Users should select the smallest size that still provides a secure and comfortable fit rather than forcing an oversized ear tip.
Key Features
- True wireless in-ear design
- 13mm drivers
- Composite driver type
- 20Hz–20kHz frequency response
- 32Ω impedance
- 107 ±3dB sensitivity
- Bluetooth 5.4
- A2DP, AVRCP, HFP and HSP profiles
- SBC codec support
- AAC codec support
- Up to 10m wireless range
- Up to 40 hours total music playtime
- Approximately 2-hour charging time
- 10-minute charge for up to 100 minutes playback
- USB Type-C charging
- IPX5 water resistance
- Touch controls
- Built-in microphones
- Two microphones for calls
- Voice-assistant support
- Three ear-tip sizes
- Black finish
- No active noise cancellation
Philips TWS Earbuds in Kerala
The Philips TAT1269 True Wireless Earbuds are a practical choice in Kerala for customers who want long battery life and straightforward everyday wireless audio without paying for advanced ANC features they may not need.
The combination of 13mm drivers, Bluetooth 5.4, AAC support, touch controls and IPX5 protection provides a balanced feature set for music, calls, workouts and travel.
Customers can compare other Philips products at Nikshan Electronics or browse Nikshan’s complete earbuds category.
Wireless Earbuds in Kannur and Calicut
For customers searching for wireless earbuds in Kannur or TWS earbuds in Calicut, the Philips TAT1269 combines compact portability with 40-hour total battery life and IPX5 protection.
Nikshan Electronics’ wider audio collection includes headphones, earbuds and speakers for customers who want to compare different listening formats.
Customers can also browse Nikshan’s dedicated earbuds range to compare brands, playtime and features.
Check current showroom pricing, online availability and applicable promotional offers before ordering, as stock and prices may change.
Buy Philips TAT1269 True Wireless Earbuds Online in Kerala
Choose the Philips TAT1269 True Wireless Earbuds for 13mm drivers, Bluetooth 5.4, up to 40 hours total playtime, IPX5 protection and convenient touch operation. Fast charging and AAC codec support add further everyday convenience without complicating the listening experience.
Buy Philips TAT1269 earbuds online in Kerala from Nikshan Electronics for genuine products, competitive offers and dependable service across Kannur, Calicut and Kerala.
Customers can explore Nikshan’s Philips brand collection, browse the earbuds category, or compare the wider headphones and speakers collection before ordering.
| Specification | Details |
|---|---|
| Brand | PHILIPS |
| Ear Placement | In Ear |
| Form Factor | In Ear |
| Driver Size | 13mm Drivers |
| Noise Control | None |
| Bluetooth Version | Bluetooth 5.4 |
| Playtime | Up to 40 Hours with Charging Case |
| Fast Charging | 10 Minutes Charge Provides Up to 100 Minutes Playback |
| Water Resistance | IPX5 Water & Sweat Resistant |
| Controls | Touch Controls |
| Microphone | Built-in Mic |
| Voice Assistant Support | Available |
| Audio Mode | Mono Mode Support |
| LED Indicator | Smart LED Indicators |
| Compatible Devices | Smartphones, Desktops, Laptops, Tablets |
| Charging Port | USB Type-C |
| Item Weight | 38.5 Grams |
| Warranty | 1 Year Warranty |
