Buy V-Guard VC 400 AC Stabilizer Online in Kerala | Nikshan Electronics

Original price was: ₹2,900.00.Current price is: ₹2,400.00.17% OFF

₹ Make Sure You're Getting The Best Deal.
Click Get Best Offer, WhatsApp or Call to check today's available offers, exchange value and EMI options instantly.

The V-Guard VC 400 AC Stabilizer offers reliable low and high voltage cut-off protection for air conditioners up to 1.5 ton. It features advanced IC technology, an Intelligent Time Delay System, built-in thermal overload protection, and a compact wall-mount ABS cabinet for safe and convenient installation. With an operating range of 170V to 280V and a 3-year warranty, it is an ideal choice for dependable AC protection at home.

The V-Guard VC 400 Stabilizer is designed to protect compatible air conditioners from potentially damaging voltage conditions while supporting reliable compressor operation. Nikshan currently markets the product as VC 400, while its technical catalogue identifies the model as VS 400 with 12A capacity, 170V–280V working range and suitability for one AC up to 1.5 ton or 18,000 BTU/hr. V-Guard’s own buying guide independently confirms these VS 400 figures. Customers comparing protection products can view the exact V-Guard VC 400 listing or explore Nikshan’s electrical stabilizer collection.

V-Guard VC 400 Stabilizer

This stabilizer is intended for one air conditioner up to 1.5 ton or 18,000 BTU per hour.

That application makes it suitable for many household split and window AC installations, provided the connected air conditioner falls within the stabilizer’s rated electrical requirements. V-Guard specifies the VS 400 at approximately 2700VA in its stabilizer buying guide.

A stabilizer should always be selected according to the actual appliance load rather than tonnage alone if the AC manufacturer specifies unusually high current requirements.

Customers can compare the VC 400 with other V-Guard stabilizers at Nikshan Electronics before selecting the correct working range.

170V–280V Working Range

For the VS 400 model reference, V-Guard officially lists a working input range of 170V to 280V.

Within its supported operating conditions, the stabilizer is designed to regulate incoming voltage before supplying power to the connected AC.

If supply voltage falls outside the safe operating limits, protection circuitry can disconnect the output rather than exposing the appliance to unsuitable voltage.

This should not be described as protection against every possible electrical fault. Proper earthing, correctly rated wiring and suitable circuit protection remain important.

Low and High Voltage Cut-Off

V-Guard’s AC-stabilizer literature highlights low and high voltage cut-off protection as a core feature.

Voltage that is too low can place additional stress on air-conditioning equipment, while excessive voltage can damage electrical or electronic components.

The stabilizer monitors the supply and disconnects the connected appliance when conditions move beyond its permitted operating window.

This automatic protection is particularly useful in locations where mains voltage varies frequently.

Intelligent Time Delay System

The V-Guard VC 400 Stabilizer is also marketed with an Intelligent Time Delay System.

The purpose of the delay is to allow the air-conditioner compressor time to equalise after a power interruption before restarting. Nikshan explains that if power returns within the compressor’s balancing period, the stabilizer automatically introduces a delay before restoring output.

This feature is especially relevant during repeated short-duration power interruptions.

The exact delay behaviour can depend on the model revision, so users should follow the supplied manual rather than repeatedly switching the stabilizer manually.

Built-In Thermal Overload Protection

Nikshan’s current exact VC 400 listing includes built-in thermal overload protection.

If abnormal loading or another fault causes excessive temperature inside the stabilizer, thermal protection is intended to disconnect output to reduce the risk of damage.

The feature provides an additional protective layer for the stabilizer and connected equipment.

It should not be treated as a substitute for installing the correct stabilizer capacity. Connecting an appliance that exceeds the rated load can still create unsafe operating conditions.

Latest IC Technology

Nikshan describes the VC 400 as incorporating IC technology for voltage monitoring and control.

Electronic control enables the stabilizer to monitor incoming voltage and respond to changing supply conditions.

For customer-facing copy, “IC-based voltage control” is preferable to broad claims such as “automatic voltage booster for all home appliances,” because this product is specifically rated for a compatible air conditioner.

It should therefore not be marketed as a universal stabilizer for refrigerators, televisions, pumps or other unrelated loads.

Compact ABS Wall-Mount Cabinet

Nikshan lists an ABS cabinet and wall-mounted design for this product.

Wall mounting keeps the stabilizer off the floor and can provide a neat installation near the air-conditioning electrical point.

The mounting surface should be structurally suitable, dry and reasonably ventilated.

The stabilizer should also remain accessible for inspection and service rather than being permanently enclosed inside cabinetry.

12 Amp Capacity

Nikshan’s technical category identifies the VC 400 / VS 400 configuration with a 12A capacity.

V-Guard’s current AC stabilizer brochure likewise assigns 12A to its 400-series stabilizers intended for ACs up to 1.5 ton.

This consistency supports using 12A as the published current rating.

Customers should still check the air conditioner’s electrical nameplate if there is any uncertainty about compatibility.

Key Features

  • Designed for one AC up to 1.5 ton
  • Supports ACs up to 18,000 BTU/hr
  • 12A rated capacity
  • VS 400 working range: 170V–280V
  • Low voltage cut-off
  • High voltage cut-off
  • Intelligent Time Delay System
  • Built-in thermal overload protection – Nikshan listing
  • IC-based control technology
  • ABS cabinet
  • Wall-mountable design
  • Approx. 2700VA VS 400 rating
  • Designed for AC voltage protection
  • 3-year warranty
  • Manufactured by V-Guard Industries Ltd.

V-Guard Stabilizer in Kerala

The V-Guard VC 400 Stabilizer is a practical option in Kerala for households using a compatible air conditioner up to 1.5 ton and requiring additional protection against unstable mains voltage.

Its combination of voltage cut-off protection, compressor time delay and 12A capacity makes it purpose-built for residential air-conditioning applications.

Customers can compare it with other electrical stabilizers at Nikshan Electronics, including models with wider input ranges for locations experiencing more severe voltage variation.

AC Stabilizer in Kannur and Calicut

For customers searching for an AC stabilizer in Kannur or a voltage stabilizer in Calicut, the VC 400 / VS 400 provides a conventional V-Guard protection platform for compatible 1.5-ton ACs.

Nikshan Electronics currently lists the V-Guard VC 400 Stabilizer alongside models such as the V-Guard VG 4170, allowing customers to compare input-voltage ranges and specifications.

Check current showroom pricing, online availability and promotional offers before purchasing, as stock and prices may change.

Buy V-Guard VC 400 Stabilizer Online in Kerala

Choose the V-Guard VC 400 Stabilizer for dedicated protection of a compatible 1.5-ton / 18,000 BTU/hr air conditioner. Its 12A rating, low/high voltage cut-off, time-delay functionality and wall-mounted ABS cabinet provide a practical feature set for household AC installations.

Buy the V-Guard VC 400 Stabilizer online in Kerala from Nikshan Electronics for genuine products, competitive offers and dependable service across Kannur, Calicut and Kerala.

Customers can view the exact VC 400 product page, explore Nikshan’s electrical stabilizer range, or compare the V-Guard VG 4170 AC Stabilizer before ordering.

V-Guard’s current AC-stabilizer documentation confirms a 3-year warranty for this product class.

Specification Details
Brand V-Guard
Product Name V-Guard Stabilizer VC 400
Model VS 400
Capacity 12 Ampere
Input Working Range 170 VAC–280 VAC
Application Suitable for one air conditioner up to 1.5 ton or 18,000 BTU/hour
Cabinet Material ABS
Mounting Type Wall mount
Voltage Protection Low and high voltage cut-off protection
Technology Latest IC technology
Time Delay Feature Intelligent Time Delay System
Overload Protection Built-in thermal overload protection
Warranty 3 years
Manufacturer V-Guard Industries Ltd.
Manufacturer Address 42/962, Vennala High School Road, Vennala, Kochi – 682028, Kerala, India
Customer Care Numbers 0120 485 0100 / 1860 180 3000
Customer Care Email [email protected]

Secure Payments
Tellus gravida ipsum aut facilisis tempus at et aliquam estsem.
Free Shipping
Non pulvinar aenean ultrices lectus vitae imperdiet vulputate a eu.
Gifts & Sales
Aliquet ullamcorper leo mi vel sit pretium euismod eget libero.
24/7 Support
Nullam iaculis vestibulum arcu id urnain pellentesque volutpat quis.

Important updates waiting for you!

Subscribe and grab 20% OFF!
Buy V-Guard VC 400 AC Stabilizer Online in Kerala | Nikshan Electronics
Buy V-Guard VC 400 AC Stabilizer Online in Kerala | Nikshan Electronics

Original price was: ₹2,900.00.Current price is: ₹2,400.00.17% OFF